Falcon Magnetic Rotabroach CM/405/1 Operator's Manual - 2) Machine Specification
Issue 3
Original Version
JUNE 2014
5
2) MACHINE SPECIFICATION
Maximum hole cutting capacity in .2/.3C steel = 50mm dia. x 50mm deep
Arbor bore = 19.05mm (3/4”) dia.
Motor Unit
CM/405/1 110V
11.5A, 1150W
CM/405/3 230V
5.75A, 1150W
Overall
Dimensions
Machine
230 x 160 x 420mm
Magnet Footprint
170mm x 85mm
Net Weight
13.0kgs
No Load
Speed
All voltages
280 min-‐1 max low gear Max
530 min-‐1 high gear Max
Tractive Force of Magnet at 20º C (25mm min. plate thickness)
The use on any material less than 25mm thick will progressively reduce the
magnetic performance. If possible additional material should be positioned under
the magnet and work piece to equate to a suitable material thickness. If this is not
possible an alternative secure method of restraining the machine MUST be used.
1850kgs
Maximum machine stroke
150mm
Twist drill diameter capacity
1-‐23mm
Tap diameter capacity (DIN376)
M3-‐M16
Maximum cutter diameter (Annular cutter)
50mm
Maximum cutting depth (Annular cutter)
50mm
It is recomended that ear and eye protectors are worn when operating this machine.
Suitable only for a single phase 25-‐60 Hz A.C. power supply
DO NOT USE ON D.C. SUPPLY
Do not use your magnetic drill on the same structure when arc welding is in progress.
D.C. current will earth back through the magnet and cause irreparable damage.
WARNING: THIS APPLIANCE MUST BE EARTHED!
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE
List of Contents with Magnetic Dill Unit
Check List
RD40070
Carrying case
YES/NO
RD4329
Safety chain
YES/NO
RD48171
Chuck & key
YES/NO
RD48259
2MT to B16 Chuck attachment
YES/NO
RD40076
M10 Tap collet (DIN376)
YES/NO
RD40077
M12 Tap collet (DIN376)
YES/NO
RD40078
M14 Tap collet (DIN376)
YES/NO
RD40079
M16 Tap collet (DIN376)
YES/NO
RD40072
Hearing protectors
YES/NO
RD40073
Safety glasses
YES/NO
RD40074
Safety gloves
YES/NO
RD40080
2.5mm Hexagon key
YES/NO
RD40081
3mm Hexagon key
YES/NO
RD4088
4mm Hexagon key
YES/NO
RD4153
5mm Hexagonal key
YES/NO
RD40082
Wrench 8
YES/NO
RD48158
Machine Guard
YES/NO