Falcon PHASER2 Manual - page 6
- C1-6 Brown -> Siren/Horn output [1A]
Connect the red (+) wire of an optional siren for confirmation
chirps. An additional relay will be required when connecting this
output to the car horn instead of a siren; see the wiring below:
- C1-7 Yellow <- Ignition input [+]
Connect to an ignition wire that shows +12V when the key is in
both [on] and [start] positions
- C1-8 Gray/Black -> Window closure output [-500mA]
Can be connected to a window closure module or for cars with
total closure/comfort closure to the cars total closure wire where
applicable (max 500mA). If the car does not have a separate total
closure wire a relay will be required.
- C1-9 Gray -> Boot release output[-500mA]
An additional relay will be required when wiring, see the wiring
below: