Falcon Professional+ FX 90 Induction G5 User's Manual & Installation Instructions - page 13
9
n
n
WARNING!
Take great care when removing the divider NOT to
scratch the inner glass door surface. Scratches in the
glass can cause stress and may cause the door to fail.
Removing the Divider
n
n
Make sure the cooker is cool before attempting to
remove the divider.
Fully open the door and remove the oven shelves. When
removing the divider, tilt it slightly upwards and grip the
underside to prevent the metal base making contact with the
door glass (Fig.2-12 and Fig.2-13).
Note: We recommend that you place a tea towel or similar
on the door glass before removing the divider. This should
prevent the door inner from scratching.
DO NOT place or slide metallic objects, including cookware,
on the door glass as this may cause scratching and
subsequent failure to occur.
Operating the Oven
The multi-function oven has two controls: a function selector
and a temperature setting knob (Fig.2-14).
Turn the function selector control to a cooking function.
Fig.2-15 shows the control set for convectional oven cooking.
Turn the oven temperature knob to the temperature you
need. The oven heating light will glow until the oven has
reached the temperature you selected. It will then cycle on
and off during cooking as the oven maintains the selected
temperature (Fig.2-16).
The Clock
Setting the Time of Day
The LCD clock is shown in (Fig.2-17). When the clock is first
connected, the display flashes ( 0.00 ) and (
) alternately.
To set the time, turn and hold the Timer knob to the clock
symbol [] and at the same time turn the Adjusting knob left
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.
IMPORTANT: The cooker will not operate unless the clock
has been set.
Note: When using the following functions, first set the clock
as required before selecting the oven function and setting
the temperature.
Setting the Minute Minder
To activate the minute minder turn the Timer knob to the
right to the [] minute minder setting – it should click into
position (Fig.2-18).
Rotate the Adjusting knob to set the time required (Fig.2-19).
You can either turn the knob back to the vertical manual
setting [] to keep an eye on the time of day, or leave it in the
[] minute minder position as the time ticks down. To stop
the beeper when it sounds, turn the Adjusting knob counter-
clockwise.
ArtNo.300-0004 2-button clock annotated
A
B
A – Timer knob, B – Adjusting knob
Fig.2-17
ArtNo.300-0005 2BC
minute minder setting
ArtNo.301-0008 2BC
Stopping the oven 2
Fig.2-18
Fig.2-21
ArtNo.270-0027
Proplus MF oven selector
control
OFF
Fig.2-15
ArtNo.270-0026
Proplus MF oven controls (2)
Fig.2-14
ArtNo.270-0028
Proplus MF temp control
indicator light
140
100
180
220
0
Fig.2-16
ArtNo.300-0006 2BC
minute minder setting 2
ArtNo.301-0007 2BC
Stopping the oven 1
Fig.2-19
Fig.2-20
Temperature selector
Function selector