FALMEC ALBA 760 Instruction Booklet - Lighting

15

UNDER CABINET: ALBA, PLUTONE, ROMBO, NETTUNO

UNDER CABINET: EROS

LIGHTING 

ASSEMBLY AND REPLACEMENT

I

1. SPOTLIGHT

To replace the lamp (“Round halogen light”):

a) Make sure the appliance is disconnected from the mains power supply.

b) Remove, by levering with a screwdriver, the support ring A for the cover glass.

c) Remove the cover glass B to access the light compartment.

d) Replace the lamp with the same type (halogen, max 20 W, 12 Volt, G4 fitting).

e) Replace the glass cover B and fasten it using the special ring A.

Round halogen light

How to replace a square halogen light:

a)  Check that the equipment is disconnected from the power supply.

b)  

Open the panel completely till 90° (see figure)

 pressing the PUSH button

c)  Replace the lamp with a similar one (halogen, max 20 W, 12 Volt, G4 con-

nection).

d) Close the panel. If the panel does not close correctly repeat the operation 

at point b.

Square halogen light