Famastil Furadeira Instruction Manual - page 30

30

ENGL

IS

H

DOUBLE SPEED (PIC 8)   

The dual speed function gives 

to the user the ability to set the 

maximum speed to be achieved by 

the screwdriver. The speed 

I

 will have 

higher torque and less rpm, as speed 

II

gives a greater number of rotations, but 

with a reduced torque capacity.

PIC 8

SPEED 

II

SPEED 

I

The automatic spindle lock allows you 

to use your drill a regular screwdriver, 

You can give an extra twist to firmly 

tighten a screw, loosen a very tight 

screw or continue working when the 

battery energy has expired (See PIC 9). 

For manual screwdriver purposes, the 

chuck is automatically locked when the 

tool is off.

AUTOMATIC SPINDLE LOCK

PIC 9

WARNING!

 To prevent damage to the gears, do not change the speed with the 

chuck on movement. Wait until it is completely stopped to make the change.

HINTS FOR OPTIMUM USE

DRILLING

• Always apply a light pressure in a 

straight line with the drill bit.

• Just before the drill tip breaks through 

the other side of the workpiece, 

decrease pressure on the tool.

• Use a block of wood to back up 

workpieces that may splinter.

• Use spade bits when drilling large 

diameter holes in wood.

SCREWDRIVING

• Always use the correct type and size of 

screwdriver bit.

• If screws are difficult to tighten, try 

applying a small amount of washing 

liquid or soap as a lubricant.

• Always hold the tool and screwdriver 

bit in a straight line with the screw.