Summary of PKB-059 Series
Page 1
User’s manual pkb-059 series 59 key programmable keyboard.
Page 2
Contents 1. Information ...................................................................................... 2 1.1 unpacking............................................................................. 2 1.2 introduction ........................................................................... 3...
Page 3: 1. Information
2 1. Information 1.1 unpacking a. Standard package 1. Pkb-059 x 1 2. Programming software diskette x 1 3. Keycap remover x 1 b. Optional magnetic card readers 1. Dual track: track 1 & 2 or track 2 & 3 2. Triple track: track 1 & 2 & 3.
Page 4: 1.2 Introduction
3 1.2 introduction pkb-059 series is a 59 key ps/2 interface programmable keyboard with optional magnetic card reader. The major functions of pkb-059 are as below. A. Ps2 interface. B. Include 2 pages of programmable keyboard and 1 page of default value. Mode 0: default value is as figure 1. It work...
Page 5: 1.3 Configuration
1.3 configuration figure 1 u.S. Version: the default value at mode 0 4.
Page 6
Figure 1-1 german version: the default value at mode 0 5.
Page 7
6 a. Mode 1 led indicator: indicate the keyboard operation is under mode 1 while the mode 1 led indicator is on b. Mode 2 led indicator: indicate the keyboard operation is under mode 2 while the mode 2 led indicator is on. C. Programmable keys: 10 keys for mode 1 or 2. D. Mode switch: change the mod...
Page 8: 1.4 Specifications
7 1.4 specifications a. Keyboard z key pitch: 19.05mm z key stroke: 4mm z operating force: 60±20g z rollover method: psedo n-key rollover z key switch contact resistance: tyr. 25 m ohms z key switch bouncing time: z key switch lifetime: 20 million operations per key. B. Magnetic card reader z iso st...
Page 9: 2. Installation
8 2. Installation follow the procedures below to install pkb-059. A. Connect the pc standard keyboard to the external keyboard connector on pkb-059. B. Be sure the computer is turned off and plug the pkb cable into the computer. C. Turn on the computer. D. Press the mode switch to see if the led ind...
Page 10
59 keys programmable keyboard vx.X xx/xx/xxxx programming keycode of mode 1 programming keycode of mode 2 set mode 0 active/unactive set repeat mode set key code of mode key code table quit please select : z select 1 for programming keyboard of mode 1 if you want to program mode 1. Z select 2 for pr...
Page 11
Quit please select : z select 6 for key code table as figure b, which can be used to program keyboard. You may print it out when you need a copy of key code. Z select 7 to quit when finishing the programming. F. Select 1 for programming key code of mode 1. The computer monitor will display as below:...
Page 12
11 z press f3 to program the whole table on mode 1 (or on mode 2). This is also a one time whole table batch programming. Note this feature would not work if the previous mode code hadn’t been saved in the disk. Z press f4 to save the programmed code. Key code 0 pause 10 20 30 1 f9 11 alt 21 c c 31 ...
Page 14
13 cc ctrl+b dc ctrl+r ec ctrl+back space cd ctrl+c dd ctrl+s ce ctrl+d de ctrl+t cf ctrl+e df ctrl+u.
Page 16
15 pc-at keyboard scan code table german keyboard key key code key key code key key code key key code esc 76h i i 43h x x 22h f9 01h ! 1 16h o o 44h c c 21h f10 09h “ 2 1eh p p 4dh v v 2ah f11 78h # 3 26h u u 54h b b 32h f12 07h $ 4 25h * + 5bh n n 31h / 85h % 5 2eh return 5ah m m 3ah * 7ch & 6 36h ...
Page 17
Figure c initial key code master key us k/b key position mapping 3f mode 1 key code mapping 6a remark: * * is change mode key * input key position: quit set initial code set past mode code save to disk * the left map is key position code. * the right map is initial key code. (default value) 16.
Page 18
Master key german k/b key position mapping 3f mode 1 key code mapping 6a remark: * * is change mode key * input key position: quit set initial code set past mode code save to disk g. Input key position code as per the left table on figure a and input key code as per figure b for each key you want to...
Page 19: Keyboards
Disk and then press “f1” to return to main menu. I. Select 2 for programming key code of mode 2. Follow the above procedures g&h to program all keys on mode 2. J. Select 7 to quit the programming after finishing programming mode 1 & 2. K. Unplug the external keyboard and try the pkb-059 as below: z ...
Page 20: 3.3 How to Clear The Key Map
19 z select 1 to program the same code of mode 1 on the 2 nd keyboard. Z select 2 to program the same code of mode 2 on the 2 nd keyboard. Z select 3 to program the same code of both mode 1 and mode 2 on the 2 nd keyboard. Z select 4 to return to main menu after finishing programming. E. Follow the ...
Page 21
Figure d master key key position mapping 3f mode 1 key code mapping 00 remark: * * is change mode key * input key position: quit set initial code set past mode code save to disk f. Press “f1” to return to main menu. G. Select 2 to clear mode 2. Follow the above procedures b-e and all keys on mode 2 ...
Page 22: Transparent Keycap
21 3.4 how to install the key name label into the transparent keycap a. Use the bundled keycap remover to take off the transparent keycap from the side of each key. B. Put the key name label (10 x 12 mm) on each key. C. Snap back the transparent keycap. 3.5 how to use magnetic card reader a. Before ...