Family inada chair i.1 HCP-i1 A Operating Manual - page 9
15
16
Manual Selection Modes
①
/Liquid Crystal Display·Explanation Of Movements
Manual Selection Modes
①
/Liquid Crystal Display·Explanation Of Movements
Manual Selection Modes
① /Liquid Crystal Display·Explanation Of Movements
Figure shows the remote control
with the external panel opened.
You can select from the following functions: Kneading, Human Hands, Double-kneading, kneading&Tapping, Rhythm Acupressure (1
and 2), Tapping (1 and 2) and Rolling (Partial and Whole massage), lower body air massage, or you can make any combination of
any of these. Also, you can make adjustments for the speed, the strength, the up-down position and the movement of the massage.
Manual Selection Modes
Standard program.
Types of rollers.
Press the program buttons to select your desired massage function.
You can change the operating program to another one by pushing the button of desired program.
During Rhythm Acupressure 1, Tapping 1 or 2, Rolling (Partial or
Whole) or Vibration (Back), you can adjust the width between rollers
using Width Adjustment buttons (Narrow, Medium and Wide).
During Kneading, Kneading & Tapping or Tapping 1, you can adjust the
operating speed using the High or Low button.
Width adjustment buttons
The Liquid Crystal Display displays the selected course, speed,
intensity, width, rotation, reverse rotation, and vertical position in words
for 3 seconds and then displays the relevant icons.
Liquid Crystal Display [Manual selection mode operation]
Kneading
Rhythm
Acupressure 2
Rhythm
Acupressure 1
Kneading &
Tapping
Double-
Kneading
Human
Hands
Tapping 1
Tapping 2
Normal massage;
the direction of the roller rotation is adjustable by pressing the button.
Roller operation feels like a hand massage;
the direction of the roller rotation is adjustable by pressing the button.
Simultaneous operation of kneading & tapping;
the direction of the roller rotation is adjustable by pressing the button.
Repeated slow pushing (simulating finger pressure);
Repeated slow pushing (simulating finger pressure) while the massage point varies horizontally;
Simple tapping;
A programmed, automatic operation of rollers using varying speeds;
Massaging the entire back
Massaging part of the back
Speed adjustment buttons
Speed and the vertical position are adjustable as well.
The vertical position of rollers is adjustable.
The width between rollers and their vertical position are adjustable.
The width and vertical position are adjustable.
The width between rollers is adjustable.
the width between rollers and their vertical position are adjustable.
the width between rollers and their vertical position are adjustable.
The direction of the roller rotation, the speed and the vertical position are adjustable.
The direction of the roller rotation, the speed and the vertical position are adjustable.
The direction of the roller rotation, the speed and the vertical position are adjustable.
Speed
Back vibration
Seat vibration
The display shows the Kneading being set
at Speed 4.
* Note, the function of Width adjustment will not
work during the operation of: Kneading, Human
Hands, Kneading & Tapping, Double Kneading,
Rhythm Acupressure 2, and combinations of
Rolling and Back Vibration.
* You can adjust the center position of the
massage during the partial rolling massage.
You can adjust the Up/Down rolling movement
of the back rollers by pressing the Up/Down
buttons.
Vibration massage of the back will be operated.
Vibration massage of the hips will be
operated.
Levels of Speed adjustment:
You can select among six speeds for Kneading, and four speeds for
Kneading & Tapping and Tapping 1.
The illustration states that the respective operation is being done.
During Kneading, Human Hands, Double-Kneading, Kneading & Tapping, Rhythm
Acupressure 1 or 2, Tapping 1 or 2, Rolling (Partial) massage and Back vibration,
you can adjust the position of the rollers using Up/Down adjustment buttons.
Up/Down adjustment
rollers
move up
rollers
move down
UP
DOWN
Vibration massage of Back and Seat will be operated simultaneously.
You can adjust the intensity between High and Low by pressing the buttons respectively.
Back/Seat vibration
Legs massage
Seat massage
Massaging the legs using air pressure
Massaging the seat using air pressure
You can make a selection between Legs, Seat, and Legs & Seat air massages.
You can adjust the intensity using the Low, Medium, and High buttons even when operating.
Lower body air massage
Legs and Seat
massage
Rolling (Whole)
massage
Rolling (Partial)
massage
Massaging the legs and seat using air pressure
Narrow
Medium
Wide
A programmed, automatic roller operation that repeats a cycle of normal and reverse
rotation during which the speed varies; the vertical position of rollers is adjustable.
●Kneading
(Normal rotation
・Speed 4)
●Rolling (Partial) massage
●Rollers width/[Wide]
●Back vibration/[High]
●Seat vibration/[High]
●Lower body air massage/
[Legs & Seat·High]
The width, speed and vertical position are adjustable.