Fangscoo-alarm TK103 User Manual - page 10
Fangscoo-alarm Co.,Ltd
www.fangscoo-alarm.com
www.fangscoo.cn
10
5.15 SOS button
Press the SOS for 3 second, it will send "help me !+ Geo-info" to all the authorized numbers every 3 minutes. It
will stop sending such a SMS when any authorized number reply SMS "help me !+ Geo-info" to the tracker.
5.16 Cut power alert
If cut power,the unit will send SMS alert.
SMS format: " Cut power Alert+Geo-info".
5.17 set number in a online positioning platform
Add the number on the online positioning platform for tracking. Adding to the special platform, send SMS
"number+tracker number" to the tracker.
for example “number13500001111”. need the platform have the fuction.
5.18 Modes switch between “telephone” and “web”
5.18.1 For sending GPS data to IP address:
Set up: Send SMS "web + password" to device.
if set successfully, the device will reply SMS "set web ok".
After this, you can call the tracker. The tracker will hang up the phone and report the GPS data to IP address.
5.18.2
For sending GPS data to telephone:
Set up: Send SMS "telephone + password" to device.
if set successfully, the device will reply ‘set telephone ok’.
And then, the device will send GPS data to your telephone by SMS.
Remark:The default is sending the GPS data to the telephone.
5.19 GPRS setting
In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by sending SMS
commands.
5.19.1 Set an IP address and port:
The IP address and port of Communication Protocol in the tracker can be modified and transferred data to other
platform. Send SMS "IP address+port number" to the unit. If the tracker’s IP address and port should be
modified to 123.98.43.254and 2456, send SMS "ip 123.98.43.254port2456"to the tracker.
5.19.2 Set APN
In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you
don’t know the APN, you can consult local network service supplier. The format of set APN is "apn + password