Fantasea FP-5000 Manual - page 8
8
Choose the function performed by function button in P, A, S and M modes. In these modes, press
down the function button to display the chosen function options, rotate command dial to highlight
desired option and release function button.
In S mode, rotate command dial to choose the desired shutter speed.
In A mode, rotate command dial to choose the desired aperture.
In P mode, rotate command dial to choose different combinations of shutter speed and aperture.
In M mode, select aperture or shutter speed by pressing the multi selector to right. Rotate command
dial to choose the desired aperture or shutter speed.
Multi-Selector buttons (8-12)
8. Flash Mode:
In order to select a flash mode:
Press the Flash Mode button.
Use the multi-selector up/down arrows to choose the desired flash mode (Auto, Auto with Red-Eye
Reduction, Off, Fill Flash, Rear-Curtain Sync and Slow Sync), and press "OK".
9. Exposure Compensation:
In modes other than M, exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.
Press the Exposure Compensation button.
Press the multi-selector up/down arrows to adjust exposure, and press "OK".
10. Focus:
Choose a focus mode according to the subject and composition (Auto focus, Infinity, Focusing limit and
Macro close-up).
Press the Focus button.
Press the multi-selector up/down arrows to highlight mode, and press ―OK‖.