Fantasea Line FML Flat Port 34 Instruction Manual - page 3
3
FML Flat Port 34 Instruction Manual 20170328
CARE & MAINTENANCE
1.
Please use the utmost care and do not use excessive force when assembling and disassembling the
different lens accessories, in order not cause any damage to the products.
2.
Keep the lens port away from extreme high temperatures, as under direct sunlight, since it might
damage the lens port.
3.
Do not clean the lens port with any chemical solvents or other materials, which might cause
damage to the lens port.
4.
Never look at the sun through the lens port.
5.
After the dive, rinse all lens components in fresh water. To ensure that the accumulated salt has
completely dissolved, it is recommended to soak the lens port installed on the housing in warm
fresh water once in a while. Wipe the water drops with a soft cloth. Do not leave any droplets to
dry on lens port surface, as permanent water spots may remain.
6.
When storing the lens port and during transportation, make sure that it is properly protected in
order to prevent scratches, cracks or any other damage to the lens port. It is recommended to store
the lens port separated from the housing.
7.
Do not store the lens port in presence of chemicals, solvents or fuels.