Water filter vacuum cleaner magic wf 4000 type wf w 11 user’s guide.
1- carrying handle 2- on-off switch 3- motor bonnet 4- buoy (float valve) 5- sponge filter 6- inner bonnet 7- water filter exhaust 8- locking latch 9- tank 10- suction mouth 11- wheeled base 12- 360° turnable wheels component parts 1- hose handle 2- air discharging hole 3- hose 4- hose connecter for...
• make sure that the voltage on the power name plate of the device corresponds to the voltage of your network. • use your machine with the right currency. The plug has to be protected with min.10 amperes. • in order not to compromise the safety of the appliance, use only original spare parts and acc...
• unlock the locking latches pulling outwards as shown in the figure. • put the motor bonnet away through holding it from carrying handle. •put water filter exhaust inside the tank as shown in the figure by pushing through the suction mouth. • fill the tank with water by respecting the exact amount ...
• unlock the locking latches pulling outwards as shown in the figure. • put the motor bonnet away through holding it from carrying handle. • lock the paper dustbag to the clips which are on the back side of the suction mouth. • the paper dustbag should be fixed into the tank as shown in the figure. ...
• unlock the locking latches pulling outwards as shown in the figure. • put the motor bonnet away through holding it from carrying handle. • the tank should be clean while using wet vacuuming function. The paper dustbag, inner bonnet and water filter exhaust should certainly be removed out of the ta...
• after connecting the tubes to each other and to the hose handle, attach the right choice of accessory to the extension tubes. • instead of using two extension tubes, you can use your machine with only one tube or without any extension tubes by connecting the right choice of accessory for your wet ...
Nominal voltage : 220-230 v ac nominal frequency : 50/60 hz power : 1400 w : ipx4 technical specifications type wf w 11.
