Fantom Magic WF 4000 User Manual - page 6
• Unlock the locking latches pulling outwards
as shown in the figure.
• Put the motor bonnet away through holding
it from carrying handle.
• The tank should be clean while using wet
vacuuming function. The paper dustbag,
inner bonnet and water filter exhaust should
certainly be removed out of the tank.
• Put the motor bonnet back on the tank
through holding it from carrying handle and
lock the latches by pushing right and left.
• Put the hose into the suction mouth and
choose the right choice of accessory for wet
vacuuming function.
• When the vacuumed water has reached to
max. level, the buoy will automatically stop
vacuuming. In that case, empty the tank then
you may go on vacuuming
NOTE: Do not put water into your tank
during wet vacuuming function.
ASSEMBLY FOR WET VACUUMING FUNCTION