Fantom Thunderbolt FM239K Owner's Manual - page 10
OPERATING INSTRUCTIONS
Please Note: The HEPA Dust Cup
Filter is washable. It should, however,
be replaced every six (6) months to
ensure peak performance of your
vacuum.
Both the Pre-Motor and Post Motor
Filters are washable. They should
however be replaced every three (3)
months to ensure peak performance of
your vacuum.
Important: Make sure that ALL filters
are completely dry before re-installing
back in the hand vacuum.
Changing & Cleaning the Pre-
Motor and Post Motor Filters
The pre-motor and post motor filters are
washable filters but should be replaced
every three (3) to six (6) months
depending on usage. Never operate he
vacuum without ALL the filters in place.
• Push the Power On/Off button to the
"Off" position and disconnect the
power cord from the wall outlet.
• Remove the flexible hose.
• Push the dust cup lock to open the
dust cup.
8
Dust Cup Lock
Button
Pre-Motor
Filter
Post Motor
Filter
• Remove the filters from the filter grills.
The pre-motor filter is located just in
front of the dust cup and the post
motor filter is located in the back
between the two wheels of the
vacuum.
• Rinse the filters in lukewarm water
and dry the filter completely. Do not
use a washing machine to rinse the
filter. Do not use a hair dryer to dry it.
Air dry only. Never operate the
vacuum without ALL the filters in
place.
• When the filters are dry, replace into
the filter grills and then into the unit.
• A severely solid or clogged filter
should be thoroughly washed in
lukewarm water. A mild detergent
can be used if required. Ensure that
the filters are completely dry before
re-installing into the vacuum.
Motor Thermostat
MESURES DE PRÉCAUTION
Important:
Si l’orifice de succion, le boyau ou le tube télescopique de l’aspirateur est
BLOQUÉ, arrêtez l’aspirateur et retirez l’obstruction avant de l’utiliser de nouveau.
4.
Pour débrancher la fiche de la
prise murale, tirez sur la fiche
plutôt que sur le cordon.
1.
Ne pas utiliser l’aspirateur près
des chaufferettes ou
radiateurs.
Important:
This vacuum cleaner is
equipped with a motor protective
thermostat. If for some reason your
vacuum overheats, the thermostat will
automatically turn the unit off. Should this
occur, unplug the vacuum from the wall
outlet and turn off the switch. Empty the
dust cup, "TapClean" the dust cup filter
and check for blockages in hose and
suction inlet. Allow the unit to cool for a
minimum of 45 minimum prior to
restarting the unit. To restart, re-plug the
vacuum into the wall socket and turn the
switch back on
5.
Évitez d’utiliser l’aspirateur pour
aspirer toute matière fumante ou
brûlante comme des cigarettes,
allumettes ou cendres chaudes.
2.
Avant d’insérer la fiche dans une prise
murale, assurez-vous que vos mains
sont bien sèches.
6.
Ne pas utiliser l’aspirateur sans que
tous ses filtres soient en place.
Remarque:
Cet aspirateur est doté
d’une fiche et d’un cordon
automatiquement escamotables. Si la
fiche ou le cordon vient à s’endommager,
vous devrez le faire remplacer par un
technicien qualifié.
3.
Avant de commencer le
nettoyage, assurez-vous
d’enlever tout objet de grande
taille ou pointu risquant
d’endommager l’aspirateur.
Avertissement:
Pendant le
rembobinage du cordon, tenez la fiche
dans la main. Évitez que le cordon «
fouette » pendant le rembobinage.
13