Fanvil D900 Quick Installation Manual - page 6

VoIP Settings

Configuration

Choose VoIP-SIP get voip account

Get VoIP account from VoIP service provider. Then configure SIP server address, server port, 

account name, password, and phone number. Finally, enable register and apply.

VoIP Settings

Enter lcd menu, and choose and press “Settings”.

Choose and press “Account”, and then you will enter Acount1. Set up SIP server address, 

server port, account name, password and phone number. You can presss more to change some 

advanced settings and then back to basic setting.Enable register and save.

Network Settings

Enter lcd menu, and choose and press “settings”.

Choose and press “WAN”. Enter Ethernet configuration and select DHCP or Static IP based 

your network access mode. If you use xDSL, press “PPPoE Set” for set up user 

name/password. And enable “connect when boot complete”. 

Configuring via lcd menu

5