Farm King 45 Series Operator And Parts Manual - page 15
Manual is about: 60"& 72" Rotary tiller
of
42
15
Operation - 45 Series Rotary Tiller
7. Pull the driveline apart and cut 1/2 of the dimension determined in step 5 from each end. Add
another 1/2" (12mm) to each cut off segment.
8. Be sure to use a hacksaw to cut 1/2 from each end of the separated shaft. Cut both the plastic
tube and the metal cores.
9. Use a file to remove the burrs from the edges that were cut.
10. Assemble the two ends of the shaft.
11. Make sure that the shaft can telescope freely. If it does not, separate the two parts and inspect
for burrs or cuttings on the shaft ends. Be sure it telescopes freely before installing.
12. Make sure the plastic covering shield is free to rotate on the shaft before installing on the
machine.