Farm King 45 Series Operator And Parts Manual - page 23
Manual is about: 60"& 72" Rotary tiller
of
42
23
Maintenance - 45 Series Rotary Tiller
Servicing Intervals
If fittings will not take grease, remove and clean thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
8 Hours or Daily: Telescoping Tubes and Quick Disconnect 20 Hours
1. Lubricate PTO driveline (7 locations).
ALERT
When using the safety chains supplied with the PTO shaft,
the shield bearings must be kept lubricated.
80 Hours or Once a Season:
2. Lubricate rotor driven end bearing (1 location)
3. Lubricate rotor drive end bearing (1 location).
4. Lubricate chain drive bearing (1 location).
- use 3 squirts only.
- push grease in gradually