Farnell L104AKL User Manual - page 11
5.3 OSD Setup
Use the
▲▼ buttons to select adjusts item,
and press source button to confirm.
Then use the
▲▼ buttons to increase/decrease the values, or use “source” button
to change the values. Press the menu button to return to the previous menu item.
5.4 Advance
Use the
▲▼ buttons to select adjusts item,
and press source button to confirm.
Then use the
▲▼ buttons to increase/decrease the values, or use “source” button
to change the values. Press the menu button to return to the previous menu item.
5.5 PIP
Use the
▲▼ buttons to select adjusts item,
and press source button to confirm.
Then use the
▲▼ buttons to increase/decrease the values, or use “source” button
to change the values. Press the menu button to return to the previous menu item.
Item
Description
Language
Use the
source buttons to select the language.
Set ID
Can be control several monitors are installed in the same area. Use the
source
buttons to into the function then use up/down key to select you setting the
number(01~99), then press menu to exit. OSD.
Press IR remote control “ID” key
again to confirm the SET ID function.
Gamma
Use the
source buttons to set the gamma values.(0,1,2)
Freeze
Use the source buttons to freeze the picture. Press this button again to disable the
freeze picture and to re-establish the normal picture.
OSD Time
Use the
▲▼ buttons to
setting the OSD menu display time.
OSD Halftone Use the
▲▼ buttons to
setting the OSD menu display halftone.
Recall
Press the source button to restore the factory settings.
Obiter (Anti
blur)
Use the
source buttons to on/off the screen saver:[Screen protector-Anti blur]
Version
Firmware Version
I
tem
Description
Scale
Use the
source buttons to select the picture size: Full/Zoom/Subtitle/Regular/
/Panorama.
Scan Size
Use the
source buttons to select the real image size: Normal/Native
H Position
Use the
▲▼ buttons to position the picture horizontally.
V Position
Use the
▲▼ buttons to position the picture vertically.