- DL manuals
- Faroudja
- Processor
- DVP5000
- Installation And Operation Manual
Faroudja DVP5000 Installation And Operation Manual
Summary of DVP5000
Page 1
Dvp5000 dvp5000u digital video processor installation and operations manual ™.
Page 2
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 inventory l...
Page 3
The faroudja dvp5000 digital video processor/ scaler is the ideal solution for optimizing the grow- ing selection of display devices that require high performance results from hdtv and standard interlaced sources. The unit is a precision video instrument used to convert 480i and 1080i hdtv interlace...
Page 4
The greatest benefit of the dvp5000 is the image quality, a result of a complex three stage process called picture plus™ technology. Stage 1 – color decoding: adaptive comb filter – cross color suppression – bandwidth expansion in order for the display to create an image, it must receive red, green ...
Page 5
Unpacking remove the dvp5000 unit from the shipping container and examine it for any signs of ship- ping damage or missing items (check inventory list below). All shipping materials should be saved if the unit is to be moved or returned for service. Installation the dvp5000 processor is designed to ...
Page 6
Installation 5 connections because of the high performance of the dvp5000 it is very important to use the highest quality cables possible, for both input and out- put signals. Both the rgb bnc and the d15 monitor output connections are active at all times and can run two displays simultaneously. To ...
Page 7
6 setup setup offers functions that must be done when the unit is initially installed. Some user features are not available with a few of the setup selec- tions so this must be done first. To prevent accidental alteration of the setup parameters, setup can only be done from the front panel or with t...
Page 8
Setup 7 note: it is necessary to identify which signal format and refresh rate is being used in order to synchronize the output. If the scan rate being used is not listed, try each of the offered rates until an image appears. Pass-through v rate 60hz 75hz 85hz note: if the hdtv format is selected, t...
Page 9
Aspect ratio control the dvp5000 has a unique aspect ratio control to allow for maximum performance from a display device. There are two types to choose from. (note: aspect ratio control is not available for the hdtv 480p/1080i/720p input.) note: for proper operation, the correct screen shape must b...
Page 10
Note: do not leave the 4:3 image with a wide angle screen on for long periods of time. This can cause permanent image burn- in with crt projectors. Image burn-in is not covered by faroudja’s warranty. Front panel controls 1. Power/standby: press to turn the unit on (green) or to standby (red) 2. Inf...
Page 11
Color 0-255, factory 128 tint 0-255, factory 128 detail 0-15, factory 8 noise reduction 0-15, factory 8 recall preset select preset 1, press factory select preset 2, press factory select preset 3, press factory select preset 4, press factory select factory, press factory note: to recall presets, fir...
Page 12
To activate the control of the dvp5000 press: to turn on press: to select an input press: each press toggles to the next input or press the number pad while the osd is visible for: 1. Composite video 2. S-video 3. Component 4. D1 (reserved) 5. Hdtv 6. Hdtv/computer pass-through to select a user pres...
Page 13
Then adjust the values by pressing the buttons. For direct access, press the color button, then enter the value on the keypad such as 150. Tint can be accessed by pressing: then adjust the values by pressing the buttons. For direct access, press the tint button, then enter the value on the keypad su...
Page 14
Setup commands command function sz# image size (0=cropped, 1=normal) s# scan rate (0-8) 0= line doubled 1= frame doubled* 2= 800x600 3= 720p 4= 1024x768 5= line quadrupled (960p) 6= 1280x1024 7= 1080p 8= 1080i w# screen shape, (0=widescreen, 1=4x3) fn input video standard 0=1=auto,2=paln 3=palm m# o...
Page 15
Dvp5000 / dvp5000u inputs (interlaced) composite 1vpp s-video y-1v pp c-286 mv pp component (beta 2) y-1vpp (interlaced) cr – 700mv pp cb – 700mv pp component (yprpb) y–1vpp (progressive) cr – 700mv pp cb – 700mv pp hdtv converter rgbhv 480p yuv (smpte 293m) 1080i/720p yprpb (smpte 247m) computer d1...
Page 16
Appendix a – scan rate specifications ntsc mode line double frame double 800x600 720p 1024x768 quad 1280x1024 1080p 1080i horizontal frequency (khz) 31.468 62.938 37.76 44.95 48.31 62.94 63.89 67.43 33.715 vertical frequency (hz) 59.94 119.88 59.94 59.94 59.94 59.94 59.94 59.94 59.94 scan type prog....
Page 17
16 limited warranty faroudja laboratories, inc. (“faroudja”) warranties that its products will be free of defects in workmanship and material and conform substantially to published speci- fications under normal use and service. This warranty is made to the first purchaser of the products and extends...