Faroudja FDP-DLPHD20 Technical Specifications - page 2
OPTICAL
Projection system:
optical engine based on 1 DMD™
HD2+ chip, sealed housing, dust proof
DMD panel:
resolution 1280x720 pixel
Brightness uniformity:
10% above or below the average
Contrast ratio:
> 2800:1 (full 0n / full off)
Projection lens:
zoom, 12 elements AR multilayer
coating, motorized focus and zoom,
manual 8% lens shift
Aperture f#:
2.7 (zoom max) - 3.3 (zoom min)
Picture size:
50-250 inches (diagonal measure)
Aspect ratio:
4/3 and 16/9
Throw ratio:
1.8:1 - 2.5:1
(throw distance: picture width)
Focus range:
2.2 - 13.0 m (7’ 3” - 42’ 8”)
Throw Distance:
60” : 2.4m - 3.3m (7’ 11” - 10’ 10”) 80” :
3.2m - 4.4m (10’ 6” - 14’ 5”) 100” : 4.0m -
5.5m (13’ 2” - 18’ 1”)
Keystone adjustment:
up to 26° (optical: ± 8° digital: ±18°)
Lamp:
120 W UHP
Lamp life time:
8000 hours (average value measured in
the laboratory under optimal
conditions; lamp hours can be reduced
if unit is misused)
ELECTRICAL
Input Signals:
CVBS on RCA/Phono type connector S-
VHS on Mini-DIN connector RGBHV on
DB15HD connector RGBS / YCrCb on
RCA/Phono type connector DVI-D
Horizontal frequency:
from 15 to 80 kHz (up to to UXGA
format @ 60 Hz)
Vertical frequency:
40-100 Hz
Video standards :
automatically selected (PAL B,G,H, I,
M,N,60, SECAM, NTSC 3.58, 4.43)
High definition video:
ATSC HDTV (480p, 720p, 1080i)
Graphic standards :
VGA, SVGA, XGA, SXGA, UXGA
Deinterlacer:
Faroudja chip set, DCDi™, 3:2 pull
down sequence conversion
Colour temperature:
adjustable from 5000 to 9300 degrees K.
Separate memories for video and high
resolution inputs - prealigned by Faroudja.
Video processor:
DTI, CTI, comb filter, noise reduction.
Sharpness, Y/C delay and NTSC tint
adjustments
Remote control:
via infrared remote control and
via computer through RS232
serial interface
Remote inputs:
via Remote Inputs Interface (optional)
and cable with EVC connector
Low Voltage Power Output: two 12 Vdc output, 100 mA max on
jack connectors
GENERAL
Supply:
from 100 to 240 Vac, -10% +6%
tolerance
Frequency:
from 48 to 62 Hz
Consumption:
180 W max
Fuse:
T 3.15A H, 5 x 20 mm
Dimensions of projector:
352 mm x 174 mm x 318 mm (LxHxD)
13”-7/8 x 6”-7/8 x 12”-1/2 (LxHxD)
Weight of projector:
12.8 lbs. (5.8 kg)
Packaging and
400 mm x 275 mm x 405 mm (LxHxD)
gross weight:
1’ 4” x 11” x 1’ 4” (LxHxD) double
reinforced carton; expandable anti-
shock packaging; gross weight,
including accessories: 8 kg (17.7 lbs);
recyclable packaging material
ENVIRONMENTAL
Operation temperature:
0 to 35°C (32° to 95°F)
Transportation temp.:
-10 to 55°C (14° to 131°F)
Storage temperature:
-10 to 55°C (14° to 131°F)
Humidity:
10% to 90% relative humidity
noncondensing
Safety:
EN 60950, UL 60950
Transportability: desktop
equipment
Electromagnetic
EN 55022 Class B
compatibility: EN
55024
EN 61000-3-2
EN 61000-3-3
Transportation:
IEC 68-2-31, IEC 68-2-32
Please visit our website at
www.faroudja.com
750 Palomar Avenue • Sunnyvale • CA 94085 • Phone: (408)735-1492
Fax: (408)735-1571 • Email: sales@faroudja.com
A division of Genesis Microchip Inc.