Fastora NAS-T4 Quick Installation Manual - III. Rear Panel Outlets
FASTORA NAS-T4 Quick Installation Guide
III. Rear Panel Outlets
1
2
3
4
5
6
1 Chassis FAN
2 A/C Inlet of Power Supply
3 FAN of Power Supply
4 Gigabit Ethernet port(LAN2)
5 10/100 Ethernet port (LAN1)
6 COM Port #1
IV. Installation
Steps
Step 1: Install HDD Via hot-swap drive tray to the drive bay.
Step 2: Connect the cable of Ethernet. The appliance is switched on
after one or both AC power cord is connected and the switch
is/are on the on position. Make sure the green IDE LED is
continuously.
Step 3: The red system LED is continuously at diagnostics status about
2 seconds, then the green system LED flash rapidly (one flash
per 0.5 second) at the appliance is booting.
Step 4: The green LED is continuously means the appliance is ready.
Step 5:Starts to manage the appliance with the File Assistant Utility in
the CD.
Step 6: Finish the setting of the appliance.
©Copyright 2003 AXIOMTEK Co., Ltd.
Version A1 August 2003
Printed in Taiwan
9410000400
2