Fastrax III Instruction Manual - page 46
40
PASSWORD EDIT
You can change the password with 6-digit character in this menu.
The default password is 555555.
When the password enable is on, the input password window displays to enter the menu.
At this time, move the cursor to the desired character by the joystick and press CTRL or IRIS
OPEN.
PROGRAM UPGRADE
When you upgrade the firmware of the dome by the serial communication, you should use
this menu. After upgrading, the dome will reboot.
• SYSTEM INFORMATION
The system information provides essential information about the dome camera if service is
required. When you view this screen, you can determine the camera type, ROM version.
The information on this screen cannot be modified.
PASSWORD EDIT SETUP
(CTRL KEY)
INPUT PASSWORD
PASSWORD :
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
SAVE AND EXIT (ESC TO EXIT)
PROGRAM UPGRADE
ARE YOU SURE ?
CANCEL
OK
SYSTEM INFORMATION
CAMERA TYPE : xxxx
H/W VERSION : Vx.xx
ROM VERSION : Vx.xx
PROTOCOL : xxxx
BUADRATE : 9600
EXIT(ESC TO EXIT)