Fastrax III Instruction Manual - Chapter 2
3
Chapter 2
— Installation and Configuration
2.1 Package Contents
The package contains the following.
Fastrax III (Dome Camera)
………………………1
Bubble Ring
………………………1(Optional)
Instruction Manual (This Document)
………………………1
Assembly Screws for Attaching Fastrax III
………………………3
Plastic Anchor
………………………3
10Pin Connector
………………………1
12Pin Connector
………………………2
CAUTION: Be sure to have caution labels (E version only) on both the body and the
base of the camera. Different version will not support input and output.
The dome camera is for use in surface mounting applications and the mounting surface
should be capable of supporting loads up to 10lb (4.5kg).
The dome camera
’s base should be attached to a structural object, such as hard wood,
wall stud or ceiling rafter that supports the weight of the dome camera.
Figure 3
– Installation
Unlock
Lock
Lock
BODY
BASE
Align extruded tap in the base to
the Keyhole on the pcb in the body
SURFACE(CEILING)
CABLE ENTRY