FaVal MERCURY S100 Operating Instructions Manual - page 13
2. Edit Program
_______________________________________________________________
13
2. Edit Program
Open the “Edit Program” menu at Main Menu / Program. In this menu you can
change, block, remove from program list, delete, move and re-sort programs.
Navigate the program list with the “
CH
▲
” and “
CH
▼
” buttons. In addition, the
following functions are available with the color buttons:
Move channel
To move a channel, select the channel to be moved and press the GREEN
BUTTON to move the channel. You are then asked which program place the
selected channel should be moved to. Enter the program place using the number
buttons and press “OK”. The channel is then moved to the desired place. You can
also select several channels at the same time with “OK” to move them. They are
then added according to the previous order to the selected program place.
Skip channel
To temporarily remove a channel from the channel list, select the channel and
press the YELLOW BUTTON “Skip channel ”. Now the channel is off the channel
list (not deleted). To restore the channel, repeat this step, and the channel is
reinserted in the channel list.
Delete Channel
Select the channel which you would like to delete and press the BLUE BUTTON.
Select “OK” in the following option to permanently delete the channel. To delete
other channels, repeat this step.
Rename Channel
Select the channel you would like to rename. First press the RED BUTTON to
open the expanded channel options and then press the GREEN BUTTON. Now
you can change the name of the selected channel on the alphabetic keyboard.
Change Channel
Select the channel you would like to change. First press the RED BUTTON to
open the expanded channel options and then press the YELLOW BUTTON. In this
menu you can change the values of the video, audio, PCR and Tele-PID with the
number buttons on your remote control. Press the “OK” button to apply the
changes or press “EXIT” to cancel the changes without saving.