FAVI B1-LED-PICO User Manual - Dvd

13

Audio

IR

DC

AV / 

VGA

Connecting your projector to a video source

◄

DVD 

Audio

IR

DC

AV / 

VGA

Mobile

     Device

Your projector supports both Composite video with line audio, and standard VGA 

video. A special Y cable is included that will allow you to connect either video source 

to your projector. When plugging the cable into your projector,  make sure the arrow 

on the connector is facing upward to help prevent plugging in the connector upside 

grasping the sides of the connector and gently pulling it out.

To connect a composite video 

device such as a DVD player to your 

projector, connect the Y cable to

the projector as shown in the 

illustration. Switch the projector 

to A/V mode and connect the 

DVD player’s A/V cable to the 

color coded RCA jacks on the Y 

cable.

Along with DVD players and other 

video equipment, your projector is 

also compatible with any mobile 

device that can output Composite 

video. To use a mobile device with 

your projector, connect it following 

the above instructions. You may also

device to output composite video.