FAVI B1-LED-PICO User Manual - page 14
14
Your projector supports standard PC VGA in resolutions from 640x480
up to 1600x1200. The B1-LED-Pico projector is designed for use with
notebook computers that can connect to an external VGA display device.
Standard desktop PC’s will also work with the B1-LED-Pico projector.
Connecting your projector to your PC
Recommended VGA resolutions:
640x480, 800x600, 1024x768
Supported VGA resolutions:
640x480, 800x600, 1024x768, 1280x768, 1280x800, 1280x960,
1280x1024, 1600x900, 1600x1024, 1600x1200
All supported VGA resolutions are displayed in the 4:3 aspect ratio.
Your projector supports a 60 Hz refresh rate. Higher refresh rates are
not supported.
◄
PC
Audio
IR
DC
AV /
VGA
power on the projector and switch it to
VGA mode. Next, connect the Y cable to the
back of the projector, and to the computer
as shown in the illustration. Your computer
should automatically detect the projector
as a VGA display upon powering up.
If you are using a notebook computer and
your projector is not automatically
detected, you may need to manually switch
your computer’s video output to the
external VGA port.