FAVI RioHD-LED-3T User Manual - page 6
If you have any issues with using your RioHD-LED-3T, before
contacting us please refer to the following troubleshooting guide:
1
2
3
4
5
6
7
8
0
-/--
0
UP
MIX
O K
HDMI1
VGA
SV
AV
ATV
DTV
Picture
Display
Menu
Return
REVEAL
INDEX
SUBPage
SIZE
Preview
H.Flip V.Flip
ON/OFF
MUTE
PIP
M
------
------
------
------
------
--
--
--
-----------
------- --
--
------------ -
------- --
--
------- -
--
--
-------
-----------
-------
HDMI2
Aspect ratio selection
Power
button
Input selection
cluster
Horizontal image
flip
Vertical image flip
Menu navigation
and selection
Access the main
menu
Image preset
selection
On screen display
Activate
Picture in Picture
mode
--
Mute button
Remote control overview:
This remote control is
also used on other
projector models,
some with different
sets of features.
This diagram points
out which buttons
control the functions
of your projector.
Projector overview
Projector will not
power on.
● Check the power cord and power
outlet.
● Check the fuse and replace if
necessary.
I have a video
source connected,
but the projector
shows “NO SYNC”.
● Check to make sure the projector is
set to the correct mode. If using HDMI,
check to make sure the projector is set
to display from the correct HDMI port.
● Check your video source, and video
cables.
Troubleshooting
Small text is hard
to read in VGA
mode.
● Set your desktop resolution to
1280x960 or lower for displaying in 4:3
mode.
Set it to 1280x768 or lower if displaying
in 16:9 mode.
● Increase the size of the text being
displayed.
Problem:
Solution:
The remote control
does not work.
● Check the batteries.
● Try aiming at the IR sensor on the
front of the projector.
(The left and right
arrow buttons also
control the volume)