FAVI RioHD-LED-3T User Manual - page 9
Keystone control
Focus adjustment
Rotate the lens clockwise or counter clockwise to adjust the
focus. Rotate clockwise for a larger picture, and counter
clockwise for a smaller picture.
Keystone adjustment
After setting up your projector, and powering it on, the image
may look trapezoid shaped even after the projector is
properly positioned. You can adjust the keystone control on
the back of the unit to correct this. Rotate the control either
left or right to adjust the keystone control.
PC Menu:
C ONT R A ST
B R IG HT NE SS
C OL OR M ODE
SC A L E
A UT O
PIC T UR E M ODE
USE R
PC
4:3
M OV E
A DJUST
E X IT
M EN U
C OL OR T E M P
USE R -R
USE R -G
USE R -B
50
50
50
PC
STA NDA R D
GEOMETRY MENU:
M OV E
A ddition
E X IT
M EN U
GEOMETRY
H-POSITION
V-POSITION
CLOCK
PHASE
Menu
M OV E
A DJU ST
M EN U
E X IT
Projector overview
Color temp
Color mode
Brightness
0-100
Adjusts the white level in the image.
Contrast
0-100
Adjusts the black level in the image.
Standard
Warm
Cool
S-RGB
Personal
Select between color
temperature factory
presets.
0-100
0-100
0-100
USER-R
USER-G
USER-B
Adjust the individual
RGB levels to your
preference.
Scale
Toggle between 4:3 and 16:9 aspect ratios.
Auto
Auto adjust VGA timing, position, and centering.
Picture mode
Adjust the brightness and contrast presets.
The following menus are only available in VGA mode. In VGA
mode, the projector behaves like a PC display. The following
menus allow for greater control over how the image displays.
Adjust the horizontal position of the image.
Adjust the vertical position of the image.
Allows for fine tuning of the clock and
phase settings to eliminate horizontal
streaking or shimmering text if present.
If auto adjusting fails to properly calibrate the image, you can
adjust the settings in the geometry menu to fine tune the image to
your preference. This menu is accessed from the PC menu by
scrolling down past the Picture mode setting.
H-position
V-position
CLOCK
PHASE
0-100
0-100