FDS FD141CV-C-1 Installation And Operation Manual - Installation Instructions
Document Number:
MAN
– FD141CV-C-1
Rev:
B
Revision Date:
05/04/2017
Page 4 of 15
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Specifications
Display Type
14.1” TFT Color LCD
Display Color
6-bit, 262,144 Colors
Screen Resolution
1920 X 1080
Supported Resolution
1600 X 1200
Brightness
1000 cd/m
2
(High Bright)
Dimensions
14.0”(W) x 8.89”(H) x 3.09”(D)
Weight
7 lbs. 6 oz.
Power
28V DC @ 2 Amps
PC & Video Input
4 - HD-SDI, 1- Digital (DVI), 1 – VGA, 1 –
Composite; Touchscreen RS-232
Operating Temperatures
0-60°C (32-140°F)
Aspect Ratio
16:9
Materials
Aluminum
Installation Instructions
All cabin equipment, such as the FD141CV-C-1, should be installed on a non-essential
bus and have a dedicated circuit breaker.
The FD141CV-C-1 is designed to mount into a standard electronics rack using (4) 10-32
Machine screws. See installation drawing on page 18 for measurement details.
Power
This is a 28VDC monitor that requires 2.0 Amps of power to operate. The unit turns on
automatically upon power application.
Wiring Suggestions
All shields should be grounded to the connector at the source, and floating at the display.
Avoid routing video wiring parallel to:
AC wiring
Strobe wiring
DC motor supply cables
Inverter cabling
Or any other potential noise source.