1. DL manuals
  2. Fearless Night
  3. Clock
  4. Digital LED Clock
  5. Operating Instructions

Fearless Night Digital LED Clock Operating Instructions

Summary of Digital LED Clock

  • Page 1

    Digital led clock fearlessnight.Com page 1 fearless night digital led clock operating instructions figure 1 – front view this clock is fully automatic* and displays the exact time and date (typically accurate to within ±1 second) from the national timebase standard (nist) via gps satellite. Addition...

  • Page 2

    Digital led clock fearlessnight.Com page 2 clock operating instructions the clock control switch is located on the back panel of the clock. The switch is a 5-way joystick (up, down, left, right, and push). In these instructions, the control switch orientation is as viewed from the front of the clock...

  • Page 3

    Digital led clock fearlessnight.Com page 3 time set mode the time set mode works differently depending on whether or not the clock is locked onto the satellite time signal. With satellite time signal: while the clock is in the time set mode, the hour value will be flashing, and the clock time will c...

  • Page 4

    Digital led clock fearlessnight.Com page 4 ir remote control requirements you will need an ir remote control that works with panasonic devices (tv, vcr, etc). Most universal remotes (for example, the urc-3220 "one-for-all") will work. Some functions, such as mute, can only be activated via ir remote...

  • Page 5

    Digital led clock fearlessnight.Com page 5 troubleshooting when the clock is first plugged in (or after a power failure), it normally takes a few minutes to lock onto the satellite time signal. Initially, the time will be within a few seconds of the exact nist time. Over the next several minutes the...