Feedandgo FEED AND GO User Manual

Other manuals for FEED AND GO: Safety & Warranty Manual, Safety & Warranty Manual

Summary of FEED AND GO

  • Page 1

    Hi! Let’s get started. © 2013 by feed and go™. Feed and watch your pets from anywhere. Patent pending.

  • Page 2: Table Of Contents

    Table of contents 1 what's in the box get to know your feed and go what do you need to setup step 1 how to set up your unit quick setup using wps wi-fi setup via access point step 2 final set up unlocking and locking your feed and go recording a personal greeting using your feed and go 2 3 6 7 8 10 ...

  • Page 3: What’S In The Box

    What’s in the box feed and go unit with internal tray power adapter with cord batteries. No batteries needed; the feed and go unit only works with the power adapter provided together with the unit. 2.

  • Page 4

    Get to know your feed and go a b c power jack - the round connector on the left side of the back panel. This powers your feed and go. Volume wheel - located next to the power jack, the volume wheel allows you to adjust the volume of your voice recording. Crank it up if your pet is hard of hearing, o...

  • Page 5

    D e f reset - if one of your settings isn't working for you or your pet (or you just want to try something new), press a pin into the hole and hold down for 5-8 seconds to clear your settings and start over. Activating the reset button will clear your feeding schedule, wi-fi connection settings, and...

  • Page 6

    N o p r s schedule - blue led, located inside the schedule (g) button, indicates a schedule is loaded onto the device and enabled. Audio - blue led, located inside the audio (h) button, indicates an audio message is playing (blinking) or being recorded (on solid). Speaker - when it's time for your f...

  • Page 7

    What do you need to setup feed and go unit power source computer / mobile device (phone or tablet) a wireless internet router (unless you want to connect via ethernet cable all the time) internet service 6.

  • Page 8: Initial Setup

    Step 1 how to set up your unit initial setup ensure that there are no cables plugged into your feed and go device. 1. Plug the power cord into the power jack (a) located at the back of the unit and insert 2. The power plug into a wall socket. The network led (j) and cloud led (k) will flash a few tim...

  • Page 9

    Note: only plug in an ethernet cable to the feeder if you want to connect with this option. Otherwise, leave the ethernet jack unplugged when using wi-fi. If feed and go will be connected to your wireless network, ensure that it is in range of your internet router at all times. B) if you have wi-fi ...

  • Page 10

    2. Press and hold the wps button (e) on your feeder. The network led (j) and cloud led (k) will flash quickly and then the network led (j) will flash slowly for a few seconds before it starts flashing quicker. 3. When the network led (j) starts flashing quicker then let go of the wps button. 4. Within 1...

  • Page 11

    B. Wi-fi set up via access point this sounds more complicated, but don't worry, it's been tested on marissa, our ceo, and she managed to set up this way. 3. The network led (j) should be blinking slowly. This indicates you are ready to set up. 10 back view d j k 1. Remove the power cable from the ba...

  • Page 12

    5. Connect to this wi-fi point. If you are using microsoft windows 7 then a message may appear prompting you to select the network type. If so, then select ‘home network’. 6. Now you’re connected to feed and go. On your computer/laptop/tablet/smartphone, open a web browser (ie, safari, chrome, opera...

  • Page 13: Step 2 Final Set Up

    Step 2 final set up unlocking and locking your feed and go 2. When the feeder powers up, it is initially unlocked. 12 1. If you haven't already, plug the unit into a power outlet near the location where you wish to feed your pet. And don't worry, as long as the feeder is within your wi-fi range, you...

  • Page 14

    Recording a personal greeting 13 your feed and go lets you record a personal greeting that will be played every time your pet gets fed. The same greeting will be played if you just want to call your pet over without feeding him. How to record a personal greeting 1. Make sure your feed and go device ...

  • Page 15: Using Your Feed And Go

    Using your feed and go accessing and controlling your feeder manage your account profile set one off or recurring feeding schedules call your pet over by playing the feed message but not actually feeding your pet watch your pet via the built in pet cam (the coolest part!) view your pet's feeding hist...

  • Page 16: Need More Help?

    Need more help? © 2013 by feed and go™. Feed and watch your pets from anywhere. Patent pending if for some reason you were not able to set up your feed and go device then that's going to be annoying, we are sorry. We have an faq's section you can find on www.Feedandgo.Com. If that doesn't help then e...