Feedandgo FEED AND GO User Manual - page 12
5.
Connect to this Wi-Fi point. If you are using Microsoft Windows 7 then a message
may appear prompting you to select the network type. If so, then select ‘Home network’.
6.
Now you’re connected to Feed and Go. On your computer/laptop/tablet/smartphone,
open a web browser (IE, Safari, Chrome, Opera, Firefox) and type in:
http://192.168.4.1
4.
Using your computer/laptop/tablet/smartphone, search in your available Wi-Fi points for
a name called 'Feed and Go (followed by a number)'. The number is the last 3 digits of
your Feed and Go device so for example 'Feed and Go-230'.
11
11.
You should now be connected to your usual Wi-Fi network, but if not, simply connect to
your Wi-Fi network as you usually would do. Now go ahead to the Final Setup section
on page 12 to complete the set up.
7.
Click on your preferred access point, for example 'Marissa Home'. If for some reason
your usual access point is not available then click the button for ‘Manual Wi-Fi Setup'
on the web page and enter the details of the Wi-Fi access point you wish to use.
10.
The device will reboot itself and after 1-2 minutes the Network LED
(J)
and the
Cloud LED (K) will be solid blue.
DID YOU KNOW?
Access Point basically turns your Feed and Go device
into a 'middleman' for you to connect it to your wireless network router.
NOTES: CERTAIN DEVICES MAY AUTOMATICALLY SHOW YOU A LIST OF YOUR
AVAILABLE WI-FI CONNECTIONS AT THIS POINT. IF SO, JUST SELECT YOUR
USUAL WI-FI ACCESS POINT, FOR EXAMPLE 'MARISSA HOME.'
8.
You should now see a message asking you to enter your passphrase for your chosen
Wi-Fi network. This is your usual passphrase. Go ahead and enter it and then click ok.
9.
You should now see a message saying 'Connection in progress. Your device is now
connecting to (for example) Marissa home. This process will take up to a minute. You
may close this window.' You should close the window by either pressing close or cancel.