Fei Bao F18-f Assembly Manual - page 16
Manual is about: Fei Bao F18-f Jet R/C model aircraft
of
31
15
F E I B A O F 1 8 - f
You will also need to open up the top holes to accommodate the bolts for the ball links. Go
very slowly on this, if the holes end up oversize, you will need to replace them. Or they will give
you flutter. Do all 6 control horns at once.
Bolt a horn into place, and adjust the linkage to the correct length
Put a piece of masking tape on the surface of the rudder where the horn will go. This tape will
protect the surface while you work there, and keep any markings you need to make from being
on the surface itself.
Mark the location of the horn.