© c. & e. Fein gmbh. Printed in germany. Abbildungen unverbindlich. Technische Änderungen vorbehalten. 3 41 01 063 06 0 by 2006. 06z de. En 61029, en 55014, en 61000-3-2, en 61000-3-3 98/37/eg, 89/336/ewg hammersdorf quality manager dr. Schreiber manager of r&d department fein service c. & e. Fein g...
2 deutsch ____________ gebrauchsanleitung________________ english _____________ instruction manual ________________ français ____________ notice d'utilisation ________________ italiano _____________ libretto delle istruzioni per l’uso_______ nederlands __________ gebruiksaanwijzing ________________ ...
3 4 2 3 6 5 1 6 a 3 41 01 063 06 0.Book seite 3 donnerstag, 12. Mai 2005 8:42 08.
4 12 8 kbm 52 u kbm 52 u kbm 50 q 7 9 9 13 10 11 3 41 01 063 06 0.Book seite 4 donnerstag, 12. Mai 2005 8:42 08.
5 j l m c e f g i h 18 15 b 16 kbm 52 u kbm 52 u 14 17 d k j 3 41 01 063 06 0.Book seite 5 donnerstag, 12. Mai 2005 8:42 08.
14 kbm 52 u / kbm 50 q en instruction manual for core drill. Symbols, abbreviations and terms used. The symbols used in this instruction manual and where necessary on the power tool, serve to draw your attention to possible hazards when working with this power tool. It is mandatory for you to unders...
Kbm 52 u / kbm 50 q 15 en for your safety. Do not use this power tool before you have thoroughly read and completely understood this instruction manual and the enclosed “general safety instructions” (docu- ment number 3 41 30 054 06 1), including the figures, specifications, safety regulations and t...
16 kbm 52 u / kbm 50 q en special safety instructions. Secure the power tool with the clamping strap supplied if there is danger of it falling, especially for work carried out at a height, on vertical con- struction elements or above the head. If there is a power cut, or the mains plug is pulled out...
Kbm 52 u / kbm 50 q 17 en 15 adapter for geared drill chuck with core drill thread (m 18x6/p 1.5) for clamping the twist drill and core drill bits. 16 adapter with securing nut (16b) adapter for quick in tool holder. 17 use of spiral bits mk 3 18 standard accessories adapter (m 18x6/p 1.5) (18c), ge...
18 kbm 52 u / kbm 50 q en operating instructions. Adjustments. Set the stroke range (figure 13). For changing the tool easily and fast, the setting of the stroke range is infinitely variable. ➤ loosen the lever (13) and set to the required stroke range. ➤ before commencing operation, tighten the lev...
Kbm 52 u / kbm 50 q 19 en reducing the speed (kbm 52 u, figure 10): changing the speed is only effective for clock- wise rotation. In anti-clockwise rotation the motor runs at a constant reduced speed. ➤ start the motor in clockwise rotation. Reducing the speed: ➤ press the “slow” button (10). For m...
20 kbm 52 u / kbm 50 q en if the supply cord of this power tool is damaged it must be replaced by a specially prepared cord available through the fein cus- tomer service centre. Accessories. Only use accessories recommended by fein. Warranty and liability. The warranty for the product is valid in ac...
Kbm 52 u / kbm 50 q 21 en specifications. Emission values for sound and vibration (two-figure – specifications as per iso 4871) type kbm 52 u kbm 50 q reference number 7 270 31 7 270 30 power input 1200 w 1200 w output 640 w 680 w speed, full load clockwise 1st gear 130 – 260 rpm 260 rpm 2nd gear 26...
