Feiyue FY31AP Installation & Operation Manual - page 5
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail:
service@feiyu-tech.com
4
l
GPS module:
Input voltage : 3.0 ~ 3.3 Volt;
Current draw : 60mA (3.3V);
Size : 32 x32x 10 mm;
Weight (excluding wires) : 22g;
Temperature range : -25 ° C ~ +70 ° C;
7. Application
The FY-31AP can be installed in the following aircraft :
1. Normal / Traditional fixed-wing planes;
2.Delta-winged plane with rudder;
3.Delta-winged plane without rudder;
4.Plane without aileron;
5 .V-tail plane with aileron;
6 .V-tail plane without aileron;
7 .Any other configuration , please e-mail us for enquiry:
service@feiyu-tech.com
8. Remote control system requirement
The FY-31AP has been tested to work with the following RC systems:
·
Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems;
·
Graupner/JR PPM 8, PPM 12, SPCM mode;
·
MPX PPM8, PPM 12 with UNI mode
·
Any remote control system using the standard of 1.5 ms neutral position.
9. FY-31AP Flight Modes
The FY-31AP has three flight modes, you can activate any of the flight modes via a free Receiver
channel and a 3-position switch (named as “SW1”) on your computer radio.
l
Mode 1: Deactivated Mode. In this mode, all control of the aircraft is by the pilot. The
FY-31AP does not participate in flight control.
l
Mode 2: Stabilized mode
.
In this mode and your transmitter control sticks at center, the
FY31AP will continuously send out controlling signal (aileron, elevator, rudder) to ensure the
aircraft maintains a stabilized, horizontal flight and constant flight direction. In this mode
FY-31AP will not allow acrobatic flights.
l
Model 3: Path Navigation mode, In this mode, the waypoint will be set according to the
flight path to automatic flight.