1. Preparation a. Opening the valves (fi gure 1a) remove the spout and the upper back-pressure valve (8376) and briefl y press together the opening lips of the spout and the back-pressure valve (8375) to open up the outlet. This step is necessary, because otherwise there will be no pump eff ect. Now...
4. Attaching the lid (figure 4) hold the gray pump arm up as high as possible. Put the lid on the container so that the flap at the back is inserted into the indention in the container (a). Now press the lid at the front until it snaps shut (b). The spout has to be connected firmly with the lid. Pre...
For questions concerning the operation of the dispensers or to order spare parts, please contact: felix austria gmbh: tel.: 02626/610-26, fax: 02626/610-94 email: info@felix.At an instruction manual is also available at: www.Felix.At/sentomat produced by asept international ab www.Asept.Com anleitun...
