FELIXprinters FELIX PRO 1 User Manual - page 12
Other manuals for FELIX PRO 1:
Cover Assembly Manual
of
66
Page | 12
User Manual – FELIX Pro 1
Rev 3
www.FELIXprinters.com
support@FELIXprinters.com
6.6 Install accessories
6.6.1 Filament arm and guide
Snap in the two spool holders on
the right back side of
the frame and the filament guide
on the right front side
of the frame.
Position the filament guide at
least 5 cm from the top and
place the filament spools on the
filament spool holders
so that the filament can unwind
clockwise
Click!
1
2
≥ 5cm