FELIXprinters FELIX PRO 1 User Manual - page 20
Page | 20
User Manual – FELIX Pro 1
Rev 3
www.FELIXprinters.com
support@FELIXprinters.com
8 PRINT AN OBJECT WITH THE SD CARD INTERFACE
This chapter describes how to start a print-job in several ways. The printer understands gcode files. These
files are obtained by preparing a 3D file (STL, OBJ, 3DS, AMF) into a gcode file. This is called slicing.
We’ll cover printing standalone with an SD card and via a PC through the USB interface. To be sure the
delivered printer is working out of the box, it is recommended to start a print-job from the supplied SD
card.
IMPORTANT: Please make sure before leaving your printer without supervision, that the first layer is
successfully finished.
8.1 SD card print
If this is your first print with the FELIX Pro 1, it is recommended to confirm the printer is working properly
after unboxing by starting a print from the SD card.
Insert the provided micro SD card in
the slot with the logo facing up.
After inserting the SD card a menu will
pop up. Select test_print_1
The print will start automatically.
The print can also be started from the
main menu.
SD print -> Print File -> Select
test_print_1
The print will start immediately.