Feller FPB 260 Instruction Manual - page 4
3
BEFORE FIRST USE
ASSEMBLY
13.
Do not immerse Motor Base in water, neither rinse it under tap water.
14.
Do not push food with fingers, or other objects (like knives), always use
the enclosed pusher for feeding food.
15.
Be extremely careful when handling blades and inserts, especially while
assembling and disassembling, and cleaning after use. Blades are very
sharp.
16.
Do not let power cord hang over the edge of a table or counter, or touch
any hot surface
17.
Do not place the appliance near a gas outlet, electric burner, or heated
oven.
18.
Please wait till all the components stop running before unplugging the
power cord and taking off the processing bowl.
19.
Ensure the capacities shown in the Specifications section are not ex-
ceeded.
20.
Always use a reliable earthed power supply to operate the appliance.
21.
The appliances are not intended to be operated by means of an external
timer or separate remote-control system.
After unpacking, disassemble unit before using for the first time. Refer to
“HOW TO DISASSEMBLE” for directions.
Wash all parts except motor base in warm, soapy water. Rinse and dry im-
mediately. DO NOT IMMERSE MOTOR BASE IN WATER.
Chopper Assembly
1.
Position Driver on motor base.
2.
Position processing bowl into the Driver and turn clockwise to seat
firmly on motor base.
3.
Place blade adaptor onto the Driver.
4.
Place chopper onto the blade adaptor.
5.
Turn the chopper to the right position.
6.
Place cover on bowl, turn clockwise until cover interlocks on bowl.