Fellowes jupiter a3 Instructions Manual - Tips
8
7
6
2
1
175
125
80
100
3
175
125
80
100
4
• Always put item in a pouch. Never laminate an empty pouch.
• Trim excess pouch material from around your item after laminating
and cooling.
• Clean laminator rollers with Fellowes roller wipes (item #5703701) after
15-20 applications to guarantee optimum laminating results. For further
details, please see “maintenance” section.
• Before laminating valuable items, do a test run with an item similar
in size and thickness.
• Do not laminate heat-sensitive documents (i.e., tickets, ultrasounds, etc.).
• Use a dry-erase marker for writing on laminated pouches.
TIPS
COLD LAMINATION STEPS
Position laminator
so you have enough
space to allow
items to pass freely
through the machine.
Use Fellowes® brand pouches
(Enhance80 – Protect175) for
best results. Select correct pouch
size for laminated item.
3
BEFORE YOU LAMINATE
CAUTION: Only use self-adhesive pouches when laminating with a cold setting.
1. Please connect the laminator to
the socket using the separate power
cable supplied.
2. Switch laminator on with
Power On / Off button at back
of machine.
3. Press Stand-by button at left
of front operating panel to switch
laminator on.
4. Use navigation keys to select
setting for cold lamination.
6. Centre item on clear side against
sealed edge; documents cannot be
repositioned once laminated.
7. Peel a small part of the protective
sheet away from document.
8. When the “wait” LED ( ) stops
flashing, place pouch, sealed edge
first, into laminator entry. Keep
pouch straight and use the edge
guide to centre it. Continue peeling
the protective sheet away.
175
125
80
100
5
5. Confirm your selection by
pressing “Enter” button in the middle
of navigation keys. “Wait” LED
( ) will stop flashing and beep will
sound when laminator has finished
temperature adjustment.