T h e s o u n d t h a t c r e a t e s l e g e n d s p/n 049515 owner , s manual “custom” vibrasonic tm.
The fender amp custom shop is dedicated to creating high quality amplification to serve top artists and discriminating players. These amps offer no-compromise sound and per- formance with vintage appeal and bullet-proof construc- tion. Of course, things like point-to-point wiring do not come cheap. ...
“custom” vibrasonic rear panel functions fuse - the fuse is in the ac supply of the amplifier and will help to protect the amplifier and operator in the event of an electrical fault. If a fuse blows, it should only be replaced with a fuse in accordance with the listing at the fuse holder. If the amp...
“custom” vibrasonic front panel functions steel channel inputs - plug-in connection for instruments. Input 1 provides 6 db more gain than input 2. The steel channel is affected by both the reverb and vibrato features. Sweet switch - this switch provides an extra boost to the high frequency response ...
"custom" v i b r e v vibrato switch - push on, push off switch that turns the vibrato feature on and off. Reverb switch - push on, push off switch that turns the reverb feature on and off. “custom” vibrasonic footswitch functions vibrato speed control - adjusts the speed of the vibrato feature. Vibr...
Adjustments hum balance adjustment - this adjustment minimizes hum heard at the speakers. It is set at the factory, and needs to be adjusted only if any of the smaller tubes, espe- cially one of the 12ax7as, are replaced. To make hum adjustment: with nothing plugged into the amplifier, rotate the st...
A product of: fender musical instruments corp., corona, ca 91720 “custom” vibrasonic specifications part number: 100v 021-5270-000 120v 021-5200-000 230v 021-5260-000 230v uk 021-5240-000 230v nordic 021-5280-000 240v australia 021-5230-000 dimensions: height: 22” (55.9 cm). Width: 26-5/32” (63.5 cm...
