Fender "Custom" Vibtasonic Owner's Manual - page 4
“CUSTOM” VIBRASONIC FRONT PANEL FUNCTIONS
STEEL CHANNEL INPUTS -
Plug-in connection for
instruments. Input 1 provides 6 dB more gain than
input 2. The STEEL channel is affected by both the
REVERB and VIBRATO features.
SWEET SWITCH -
This switch provides an extra boost
to the high frequency response of the STEEL channel.
The effect is especially noticeable at lower volume set-
tings.
STEEL CHANNEL VOLUME CONTROL -
Adjusts the
overall loudness of the STEEL channel.
TREBLE CONTROL -
Adjusts the amount of high fre-
quency boost (accentuation) or cut (attenuation) in the
STEEL channel.
MIDDLE CONTROL -
Adjusts the amount of mid-range
frequency boost or cut in the STEEL channel.
BASS CONTROL -
Adjusts the amount of low frequency
boost or cut in the STEEL channel.
Note: If all tone controls are full counter-clockwise,
there will be no sound.
GUITAR CHANNEL INPUTS -
Plug-in connection for
instruments. Input 1 provides 6 dB more gain than
input 2. The GUITAR channel is affected by both the
REVERB and VIBRATO features.
FAT SWITCH -
This switch provides an extra boost to
the low frequency response of the GUITAR channel.
GUITAR CHANNEL VOLUME CONTROL -
Adjusts the
overall loudness of GUITAR channel.
TREBLE CONTROL -
Adjusts the amount of high fre-
quency boost or cut in the GUITAR channel.
MIDDLE CONTROL -
Adjusts the amount of mid-range
frequency boost or cut in the GUITAR channel.
BASS CONTROL -
Adjusts the amount of low frequen-
cy boost or cut in the GUITAR channel.
Note: If all tone controls are full counter-clockwise,
there will be no sound.
REVERB CONTROL -
Adjusts the amount of reverberat-
ed signal that is mixed in with the original dry signal.
Turning the control full counter-clockwise turns the
REVERB feature off. The REVERB feature can also be
turned on and off using the footswitch.
A,B.
C.
D.
E.
F.
G.
H,I.
J.
K.
L.
M.
N.
O.