Mustang floor mustang floor by fender ® ™ advanced owner's manual advanced owner's manual.
M u s t a n g ™ f l o o r contents contents getting started! . . . . . . . . . . . . . . . 2 data wheel . . . . . . . . . . . . . . . . . . 2 footswitch modes . . . . . . . . . . . . . . 3 tap/tuner . . . . . . . . . . . . . . . . . . 3 amplifier menus . . . . . . . . . . . . . . . 4 effects menus ....
M u s t a n g ™ f l o o r footswitch modes footswitch modes press the mode button to switch between preset and fx select modes: preset mode mode preset / fx select in preset mode the green led lights up and the bottom five footswitch buttons (0•5, 1•6, 2•7, 3•8, 4•9) are used to select presets from ...
M u s t a n g ™ f l o o r amplifier menus amplifier menus bypassing amp settings you can turn on or off (bypass) all amp settings that have been selected for the current preset by pressing the amp button. The amp menus contain amplifier modeling selections, and settings for a variety of parameters s...
M u s t a n g ™ f l o o r 3. Press the data wheel one or more times until the setting that you want to adjust is highlighted, then turn the data wheel to adjust the setting. You can also hold down an effect button and turn the data wheel to scroll through settings faster! Press the data wheel repeat...
M u s t a n g ™ f l o o r • bypass effect — (on/off) select "on" to bypass the effect current- ly selected in the expression behavior menu when switching the pedal to volume mode or select "off" to leave the effect active. • reset parameter to preset value when switching to volume mode — (on/off) se...
M u s t a n g ™ f l o o r • mode 3—bypass the stompbox, modulation or delay effects, using the buttons labeled: stomp / mod / delay (in line with the mode 3 led). The footswitch button leds indicate the effects that are active. • tuner mode—press and hold the mode button to activate the tuner. The s...
M u s t a n g ™ f l o o r 2. Stereo pa system: set output configure to "stereo" and set output voicing to "pa system." l unbalanced output t (or xlr output) r unbalanced output t (or xlr output) 3. Mono pa system -and- mono monitor (or combo amplifier): set output configure to "mono," then set r...
M u s t a n g ™ f l o o r phones jack phones plug in your headphones, ear buds, or powered speakers to enjoy the mustang floor's stereo features. This jack may also be used as a stereo recording output. The output voicing is automatically set to "pa system" while the phones jack is used, internally ...
M u s t a n g ™ f l o o r midi appendix midi appendix stomp cc's bypass = cc# 23 (0-63 eff ect off, 64-127 eff ect on) cc# 28 = stomp eff ect cc# 29 cc# 30 cc# 31 cc# 32 cc# 33 none = 0 - - - - - overdrive = 1 level gain low mid high wah = 2 mix frequency heel freq toe freq high q touch wah = 3 mix ...
M u s t a n g ™ f l o o r reverb cc's bypass = cc# 26 (0-63 eff ect off, 64-127 eff ect on) cc# 58 cc# 59 cc# 60 cc# 61 cc# 62 cc# 63 none = 0 - - - - - small hall = 1 level decay dwell diff usion tone large hall = 2 level decay dwell diff usion tone small room = 3 level decay dwell diff usion tone ...
This product is covered by one or more of the following patents: us pat. 6,222,110 amplificador de audio importado por: instrumentos musicales fender s.A. De c.V., calle huerta # 132, col. Carlos pacheco, c.P. 228890, ensenada, baja california, mexico. Rfc: imf870506r5a hecho en china. Servicio de c...
