Fender Ramparte Owner's Manual - page 8
MAJESTIC AMPLIFICATION FOR THE DISCERNING MUSICIAN:
• 9 Watts of output power
• One 6L6 output tube; Class “A” circuit
• Two 12AX7 preamp tubes
• 12” Special Design Ramparte
speaker
• 1/4" speaker plug may be
disconnected to use an
external speaker enclosure
• Two inputs (COOL and HOT)
with volume controls for each
• COOL channel voiced for warm clean
and moderately overdriven tones
• HOT channel delivers overdrive tones
from mild to wild
• Two-tone chocolate & copper “home fabric” covering
• Vintage leather strap handle
<<< REAR
PANEL
TYPE:
PR 2409
POWER REQUIREMENTS:
80 W
INPUT IMPEDANCE:
COOL: 1MΩ
HOT: 1MΩ
POWER OUTPUT:
9W RMS into 8Ω @ 10%THD
FUSE:
F2AL, 250V for 100V–120V versions
F1AL, 250V for 220V–240V versions
TUBES:
One 6L6
Two 12AX7
SPEAKER:
8Ω, 12", 20W
Extension speaker (if used): 8Ω, 20W minimum
DIMENSIONS:
HEIGHT: 15.75 in (40.0 cm)
WIDTH: 17.33 in (44.0 cm)
DEPTH: 9.875 in (25.0 cm)
WEIGHT:
21 lb (9.54 kg)
Product specifications are subject to change without notice.
PRODUCT REGISTRATION — Please visit:
http://www.fender.com/prodreg
COOL INPUT / COOL VOLUME
POWER INDICATOR
HOT INPUT / HOT VOLUME
POWER CORD SOCKET —
Connect to a grounded outlet
using the included power
cord in accordance with the
voltage and frequency ratings
specified on the rear panel of
your amplifier.
SPEAKER JACK — Connect the
internal speaker or an external
speaker (8Ω, 20W min.) here.
POWER SWITCH — Switches
the unit on (ON) and off (OFF).
FUSE — Protects the unit in case of electrical
faults. Replace only with the type and rating
specified on the rear panel of your amplifier.
HOT
VOLUME
HOT
INPUT
COOL
INPUT
COOL
VOLUME
1
4
7
10
13
16
1
3
5
7
9
ON
OFF
FUSE
EN
GL
ISH