Fender SFX SATELLITE Reference And Owner's Manual - page 9
9
If the SFX Satellite is set up but does
not function, check the following
items:
• Is the power cord properly plugged into an
electrical outlet?
• Is there power at the outlet?
• Are the control knobs turned above 1?
• Is the volume control on the instrument turned up?
• Are the control knobs on your external
equipment turned above 1?
• Is the power cord on your external equipment
properly plugged into an electrical outlet?
• Are any cords cut, frayed or damaged?
• Are the DSP control knobs turned above 1?
• Is the instrument properly plugged into
the amplifier?
• Is the guitar amp properly plugged into the SFX
Satellite?
• Are the BYPASS and SFX ON/OFF switches
configured correctly?
(Eliminate any effects pedals, external signal processing
devices and try using another cord.)
If after checking all of the above your amplifier is still
not performing correctly, consult your nearest
authorized Fender Service Center.
The exclusive covering on your
Fender SFX Satellite cabinet has been
especially designed for years of
lasting beauty. A light soapy solution
on a sponge can be used to remove
dirt and residue that may accumulate
in the fabric. Be careful not to let any liquid come in
contact with operating surfaces. REMEMBER TO
UNPLUG THE POWER CORD BEFORE
CLEANING AND WAIT UNTIL THE UNIT IS
COMPLETELY DRY BEFORE PLUGGING IT IN.
TROUBLESHOOTING
COVERING CARE