T h e s o u n d t h a t c r e a t e s l e g e n d s p/n 039080 owner , s manual stage 112.
Standard strat / general purpose / any position singing strat insanity / any position rock solid / humbucking bridge dry scream / humbucking lead try this: on me drive channel for a real bluesy sound, use me neck pick- up with me guitar volume control about half way down! Experiment with other pick-...
Stage 112se owner’s manual the fender stage i 12se amplifier is a straight-ahead combination of radical new distortion sounds and time-tested classic fender sounds packaged together in a solid-state configuration, which is both easy to use and inherently reliable. The stage 112se normal channel feat...
A. Input 1 -a high impedance, high sensitivity plug-in connection for instruments. B. Input 2-a plug-in connection for instruments. This input exhibits lower input impedance and sensitivity than input 1, and is useful with active pre-amp guitars. This input will provide a darker tone with passive gu...
L. Treble - adjusts the amount of high frequency boost or cut in the drive channel. This control is post distortion and is useful in adjusting the distortion characteristic from smooth to brash. M. Bass - adjusts the amount of low frequency boost or cut in the drive channel. This control is post dis...
External speaker jack the stage i 12se features a plug in connection for external speakers (8 ohm minimum). Line cord this amplifier is equipped with a grounding type supply cord to reduce the possibility of shock hazard caused by leakage current. Be sure to connect it to a grounded ac receptacle. D...
Troubleshooter’s checklist stage 112se specifications: - is the power cord properly plugged into an electrical outlet? - is there power at the outlet? - is the speaker properly connected to the amplifier? - are all the control knobs turned above four? - is the volume control on the instrument turned...
A product of: fender musical instruments corp., corona, ca 91720 stage 112se block diagram.
