Fender Stage 112SE Owner's Manual - Troubleshooter’S Checklist
TROUBLESHOOTER’S CHECKLIST
STAGE 112SE SPECIFICATIONS:
- Is the power cord properly plugged into an electrical outlet?
- Is there power at the outlet?
- Is the speaker properly connected to the amplifier?
- Are all the control knobs turned above four?
- Is the volume control on the instrument turned up?
- Is your instrument properly plugged into the amplifier?
(Eliminate all effects and try another guitar cord.)
If, after checking all of the above, the system is still not
working correctly, consult your Fender Service Dealer.
TYPE:
PR 203
PART NUMBER:
120V Version:
22-6700
230V Version:
22-6730
DIMENSIONS:
Height:
1811
( 45.0 cm )
width:
22-1/2”
( 57.2 cm )
Depth:
10.5”
( 26.7 cm )
Weight:
46 Lbs.
( 20.7 kg. )
POWER OUTPUT:
160 Watts R.M.S. into 4 ohms at 5% T.H.D.
INPUT IMPEDANCE:
Input 1:
850k ohms
Input 2:
66k ohms
EFFECTS LOOP:
Preamp Output Impedance:
1k ohms
Power Amp Input Impedance:
10k ohms
Power Amp Sensitivity:
1.4V for clipping
LINE OUTPUT:
-3 dBV into 600 ohms (minimum).
POWER REQUIREMENT:
100 - 120VAC, 50-60 Hz, 4A max
230 - 240VAC, 50 Hz, 1.8A max
SPEAKER:
Fender Special Design 12”, 8 ohm ( P/N 026488 )
SOUND:
Classic
to
TraSH
... and all points in between!