Fenix CH-2000B TURBO Safety & Operating Instructions Manual - Assembly Instruction
3
• Place the appliance on a flat, stable, heat-resistant surface.
Operating the product in any other position could cause a
hazard.
• There may be trace of odour during the first few minutes of
initial use. This is normal and will quickly disappear.
• Do not attempt to repair, disassemble or modify the appliance.
There are no user-serviceable parts inside.
• CAUTION – if using an extension lead please ensure you do
not exceed the maximum rated running wattage/load of the
extension lead.
Assembly Instruction
Before using the heater, the feet (supplied
separately in the carton), must be fitted to
the unit. These are to be attached to the
base of the heater using the 4 small self-
tapping screws provided, taking care to
ensure that they are located correctly in the
bottom ends of the heater side mouldings.
Operating Instructions
1. Place the product in an upright position on a flat, steady,
stable, heat-resistant surface. Make sure there is nothing
flammable or heat sensitive within 1 metre (40 inches).
Operating the product in any other position could cause a
hazard.