Ferax BCD-1013 Manual - English

31

ENGLISH

Original instructions

CONTENTS

1. Introduction ..........................................31

2.  Technical specifications .......................31

3.  Contents of packing .............................31

4.  Product information .............................32

5 

Safety instructions ................................32

5.1  Specific safety instructions ..................32

5.2  Important safety notes on charger and 

 batteryblok ...........................................32

5.3  Electrical safety ....................................33

5.4  Replacing cables or plugs ....................33

6 

Mounting accessories ...........................34

6.1  Fitting and removing drill cutters ........34

6.2  Connecting and removing the battery ..34

7 Operation ..............................................34

7.1  Adjusting the speed ..............................34

7.2  Adjusting the torque ..............................35

7.3  Driving and removing screws ..............35

7.4 Drilling .................................................35

7.5 Environment .........................................35

7.6  Charging the battery .............................35

8 

Service & maintenance ........................36

8.1 Cleaning ...............................................36

8.2 Lubrication ...........................................36

8.3 Faults ....................................................36

8.4 Environment .........................................36

8.5 Guarantee .............................................36

Spare parts list ...............................................56

EC conformity declaration ............................57

1. INTRODUCTION

Read the operating instructions care-

fully before using this device. 

Familiarise yourself with its functions 

and basic operation. Service the device as per 

the instructions to ensure that it always fun-

ctions properly. The operating instructions and 

the accompanying documentation must be kept 

in the vicinity of the device.

2. TECHNICAL SPECIFICATIONS

Voltage .......................................... V 18

Charger voltage ............................. V 230

Charger frequency ........................Hz 50

Battery output ............................. Ah 1.3

Charging time............................hour 1-1.5

Drill speeds ......................................  2

No-load speed

Position I ..................................r/min  0 - 350

Position II .................................r/min

0 - 1 250

Chuck capacity ...........................mm 10

Lpa (acoustic pressure) ..........dB(A)  65 + 3

Lwa (acoustic power) ............dB(A)  76 + 3

Vibration ................................... m/s

2

Vibration level

The vibration emission level stated in this 

instruction manual has been measured in accor-

dance with a standardised test given in EN 

60745; it may be used to compare one tool 

with another and as a preliminary assessment 

of exposure to vibration when using the tool for 

the applications mentioned.

•  Using  the  tool  for  different  applications,  or 

with different or poorly maintainted accesso-

ries, may significantly increase the exposure 

level.

•  The  times  when  the  tool  is  switched  off  or 

when it is running but not actually doing the 

job, may signifi cantly reduce the exposure 

level.

Protect yourself against the effects ofvibra-

tion by maintaining the tool and its acces-

sories, keeping your hands warm, and orga-

nizing your work patterns.

3. CONTENTS OF PACKING

1 Cordless drill

1 Battery

1 Battery charger

12 Bits

1 Operating instructions

1 Safety instructions