Ferax BCD-1013 Manual - 8. Service & Maintenance

36

can be used until you start noticing that the 

power of the drill is elapsed. The battery is 

discharged now and needs to be charged.

8. SERVICE & MAINTENANCE

Make sure that the machine is not 

live when carrying out maintenance 

work on the motor.

The machines have been designed to operate 

over a long period of time with a minimum of 

maintenance. Continuous satisfactory opera-

tion depends upon proper machine care and 

regular cleaning.

8.1 Cleaning

Keep the ventilation slots of the machine clean 

to prevent overheating of the engine. Regularly 

clean the machine housing with a soft cloth, 

preferably after each use. Keep the ventilation 

slots free from dust and dirt. If the dirt does not 

come off use a soft cloth moistened with soapy 

water. Never use solvents such as petrol, alco-

hol, ammonia water, etc. These solvents may 

damage the plastic parts.

8.2 Lubrication

The machine requiers no additional lubrication.

8.3 Faults

Should a fault occur, e.g. after wear of a part, 

please contact the service address on the war-

ranty card. In the back of this manual you find 

an exploded view showing the parts that can be

ordered.

8.4 Environment

To prevent damage during transport, the app-

liance is delivered in a solid packaging which 

consists largely of reusable material. Therefore 

please make use of options for recycling the 

packaging.

Faulty and/or discarded electrical or 

electronic apparatus have to be col-

lected at the appropriate recycling 

locations.

8.5 Guarantee

Warranty conditions and product liability apply

according to national legislation.