Ferguson FBOX3 User Manual - Remote Control
Remote control
Due to the standardization of Ferguson equipment,
the majority of these devices use the same remote
control unit. This means that not all keys are used
by this equipment model!
Remote Matching
1. Disconnect the FBOX power cord.
2. Press and hold both the 'OK' button and back (4)
for about 3 seconds and release all of the buttons.
Diode D1 starts blinking.
3. Immediately plug the power cord into FBOX'a.
4. The unit will start. During the boot process RCU
will be paired automatically.
5. If the pairing fails, repeat steps 1 to 4 to pair
again.
Signal Indicator Instructions
(1) D1 indicator: Brighten White when press the
remote control button.
(2) Show hidden menu.
(3) Show main menu.
(4) Back to previous or upper interface/menu.
(5) Move the highlight or cursor up/down/left/right.
10